SOLIDline SoftPerfection-S

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • Do not use a switch with simultaneous UP/DOWN command
  • Rigid shaft connectors and stoppers are absolutely essential
  • Adjustment of the end position possible via operating switch

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Full stop*

Below

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
GU45__E04 GU4510E04 GU4520E04 GU4530E04 GU4540E04
Voltage 230 V~/50 Hz
Current 0,47 A 0,63 A 0,80 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 105 W 140 W 180 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm
Speed 16 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Overall length¹ 519.5 mm 549.5 mm 569.5 mm 589.5 mm
Operating mode S2 4 min. S2 5 min. S2 4 min. S2 4 min.
Sound pressure level² 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A)
diameter 45 mm
Weight approx. 1.9 kg approx. 2.2 kg approx. 2.4 kg approx. 2.7 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.