SOL.TECline X01 Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.
  • Rigid shaft connectors and stoppers are absolutely essential

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Technical data tubular motor SOL.TECline X01 Radio

SOL.TECline
>
SOL.TECline X01 Radio GB45F12-__/__GB45F12-10/15GB45F12-20/15GB45F12-30/15GB45F12-40/15GB45F12-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes