SOLIDline Touch

Mechanical tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

The engine has the following features:

1 button technology

Both end positions can be precisely adjusted using a single button on the motor head. No more complications when setting the end positions.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • Quick adjustment of the end positions without adjustment cable

Notes

  • Do not use a switch with simultaneous UP/DOWN command
  • No parallel connection possible

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Below

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
GU45__MGU4506MGU4510MGU4520MGU4530MGU4540MGU4550M
Voltage230 V AC / 50 Hz
Electricity0,36 A0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance83 W105 W140 W180 W220 W220 W
Torque6 Nm10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm16 rpm12 rpm
Final cut-off range38 revolutions
Protection rating IP44
Total length¹509.5 mm519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level²39 dB(A)39 dB(A)41 dB(A)41 dB(A)43 dB(A)–
Durchmesser45 mm
Weightapprox. 1.85 kgapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.