SOL.TECline SoftPerfection-X01

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • Rigid shaft connectors and stoppers are absolutely essential
  • Adjustment of the end position possible via operating switch
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with stopper and anti-lift device and rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOL.TECline
SOL.TECline SoftPerfection-X01 GB45E03-__/__ GB4510E03-10/15 GB4520E03-20/15 GB4530E03-30/15 GB4540E03-40/15 GB4540E03-50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 438 mm 458 mm 488 mm 518 mm 518 mm
Operating mode S2 4 min.
Sound pressure level² 39 dB(A)
diameter 45 mm
Weight ca. 1,9 kg ca. 2,0 kg ca. 2,2 kg ca. 2,4 kg ca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.