SOL.TECline Easy

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Technical data tubular motor SOL.TECline Easy

SOL.TECline
SOL.TECline Easy GB45E01-__/__ GB45E01-10/15 GB45E01-20/15 GB45E01-30/15 GB45E01-40/15 GB45E01-50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length 438 mm 458 mm 488 mm 518 mm 518 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 45 mm
Weight ca. 1,9 kg ca. 2,0 kg ca. 2,2 kg ca. 2,4 kg ca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes