GJ56__ T90

Mechanical blind motor

Downloads

The motor is suitable for these applications

The engine has the following features:

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

HighTemperature

This blind operator is optimized for use in high-temperature environments. Thanks to the use of special materials and components, it is suitable for use in temperatures up to +90°C. It naturally meets the requirements specified in Cahier 3677 of the CSTB for Class B: 8,000 cycles at room temperature, 2,000 cycles at 75°C, and 500 […]

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

GJ56__ T90GJ5606 T90GJ5616 T90
Voltage230 V AC / 50 Hz
Current0,40 A0,70 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power output90 W150 W
Torque6 Nm2 x 8 Nm
Speed26 rpm
Final cut-off range80 revolutions
Protection classIP 54
Overall length I (w. cpl.)304 mm336 mm
Operating modeS2 6 min.
Sound pressure level34 db(a)40 db(a)
Diameter55 mm
weightapprox. 1.60 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.