GJ56__ AIR

AIR radio shutter motor

Downloads

The motor is suitable for these applications

The engine has the following features:

Adjustable blade angle

The adjustable basic angle of the vanes is important for ensuring consistent engagement of the intermediate position at the set vane angle. When the blind is opened and closed, the slats are at different angles. To compensate for this behavior at an intermediate position, the drive must know by how many degrees it needs to […]

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available as silent drive up to 10 Nm, for indoor use only
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data tubular motor SOLIDline with SOC head

GJ56__F03
>
GJ56__F03GJ5606kF03GJ5610F03GJ5620F03
Voltage230 V AC / 50 Hz
Current0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power93 W135 W190 W
Torque6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Overall length I (w. cpl.) 319.5 mm329.5 mm356.7 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.
Diameter55 mm
weightapprox. 1.50 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.