SLIM.TECline SoftPerfection-X01

Electronic tubular motor Ø 35 mm

Downloads

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left / right installation
  • Can be wired in parallel
  • Already in learning mode on delivery

Notes

  • Rigid shaft connection and stopper absolutely necessary
  • Adjustment of end positions possible via operating switch
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Technical data tubular motor SLIM.TECline SoftPerfection-X01

SLIM.TECline SoftPerfection-X01 GB35E03-06/26 GB35E03-10/17
Voltage 230 V~/50 Hz
Current 0,54 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 120 W
Torque 6 Nm 10 Nm
Speed 26 rpm 17 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Overall length 453 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 35 mm
weight approx. 1.6 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes