Electronic blind motor
The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.
The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.
The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.
Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.
The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.
Auf Position
Full stop*
Auf Position
* Drive onto the overrun limit switch
| GJ56__ E14 Performance with elect. Limit switch | GJ5603k | GJ5606k | GJ5606¹ | FJ5610 | GJ5620 |
|---|---|---|---|---|---|
| Voltage | 230 V AC / 50 Hz | ||||
| Electricity | 0,40 A | 0,40 A | 0,40 A | 0,60 A | 0,85 A |
| Cos Phi | >0,95 | ||||
| Inrush current (factor) | × 1.2 | ||||
| Performance | 90 W | 93 W | 90 W | 135 W | 190 W |
| Torque | 3 Nm | 6 Nm | 6 Nm | 10 Nm | 2 x 10 Nm |
| Speed | 26 rpm | ||||
| Limit switch range | >200 revolutions | ||||
| Protection class | IP 54 | ||||
| Operating mode | S2 4 min. | S2 4 min. | S2 6 min. | S2 4 min. | S2 4 min. |
| Total length I (m. cpl.) | 319.5 mm | 319.5 mm | 324.5 mm | 329.5 mm | 356.7 mm |
| Diameter | 55 mm | ||||
| Weight | approx. 1.50 kg | approx. 1.50 kg | approx. 1.60 kg | approx. 1.70 kg | approx. 2.20 kg |
| Ambient humidity | dry, non-condensing | ||||
| Storage temperature | T = -15°C .. +70°C | ||||
| ¹ Runtime-optimized motor | |||||
| Subject to technical changes. | |||||
You are currently viewing a placeholder content from Elfsight. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
