GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.