SLIM.TECline Easy

Electronic tubular motor Ø 35 mm

Downloads

The motor is suitable for these applications

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Fast adjustment of end positions thanks to precise spindle cut-off

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Technical data tubular motor SLIM.TECline Easy

>
SLIM.TECline Easy GB35E01-__/__GB35E01-06/26GB35E01-10/17
Voltage230 V AC / 50 Hz
Current0,54 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power120 W
Torque6 Nm10 Nm
Speed26 rpm17 rpm
Limit switch range200 revolutions
Protection rating IP44
Overall length453 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
diameter35 mm
weightapprox. 1.6 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes