SOLIDline Qi Radio

Electronic tubular motor Ø 45 mm with radio

Downloads

The motor is suitable for these applications

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Operation

The motor can be operated using a remote control or, alternatively, via a control switch (wired).

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available as a high-speed model upon request

Limit switch adjustment

Above

On stop

Below

Auf Position

Possible cylinder heads

SOC head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
GU45__-F13 GU4506-F13 GU4510-F13 GU4520-F13 GU4530-F13 GU4540-F13 GU4540-F13
Voltage 230 V~/50 Hz
Electricity 0,36 A 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 83 W 105 W 140 W 180 W 220 W 220 W
Torque 6 Nm 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 509.5 mm 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level² 39 dB(A) 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Radio frequency 433 MHz
Weight approx. 1.85 kg ca. 1,9 kg ca. 2,2 kg ca. 2,4 kg approx. 2.7 kg approx. 2.7 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.