SOLIDline Flex AIR

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

The engine has the following features:

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Full stop*

Below

Auf Position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Possible cylinder heads

Technical data tubular motor SOLIDline with SOC head

>
SOLIDline Flex AIR GU45__-F04GU4510-F04GU4520-F04GU4530-F04GU4540-F04GU4550-F04
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length I ¹519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level ²39 dB(A)41 dB(A)41 dB(A)43 dB(A)
Durchmesser45 mm
Weightapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.