Venetian blinds – GEIGER Antriebstechnik https://geiger.de/en/ Fri, 12 Jun 2026 09:48:43 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Venetian blinds – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 434F6__ https://geiger.de/en/product/434f6__/ Mon, 27 Apr 2026 11:16:08 +0000 https://geiger.de/produkt/434f6__/

434F6__

Bevel gearbox with mounted extension

Output torque

max. 5.0 Nm

Gear reduction

2:1

Efficiency

0,72

The gearbox is suitable for these applications

Blinds Venetian blinds

Features

  • For 50 mm top box

  • Housing made of high-strength plastic

  • Continuous inner profile on the output drive, therefore center installation also possible

  • Push-through inner profile on the drive, therefore only one gearbox version for the same direction of rotation for left or right-hand installation

  • See 432F… for matching gearbox brackets for various upper body dimensions. Gearbox holder

  • Without end stop (AB)

pluggable_crank_system_en

Technical data

Variants

Item no. Drive Output drive Installation side
434F616 8 mm square socket, push-through 14 mm internal groove left/right
434F630 6 mm square socket, push-through 14 mm internal groove left/right
]]> 434F6__ https://geiger.de/en/product/434f6__-2/ Mon, 27 Apr 2026 07:32:16 +0000 https://geiger.de/produkt/434f6__-2/

434F6__

Bevel gearbox

Output torque

max. 5.0 Nm

Gear reduction

2:1

Efficiency

0,72

The gearbox is suitable for these applications

Blinds Venetian blinds

Features

  • For 50 mm top box

  • Housing made of high-strength plastic

  • Continuous inner profile on the output drive, therefore center installation also possible

  • Push-through inner profile on the drive, therefore only one gearbox version for the same direction of rotation for left or right-hand installation

  • See 432F… for matching gearbox brackets for various upper body dimensions. Gearbox holder

  • Without end stop (AB)

pluggable_crank_system_en

Technical data

Variants

Item no. Drive Output drive Installation side
434F615 6 mm hexagon socket, push-through 6 mm hexagon socket left/right
434F625 6 mm square socket, push-through 12 mm square socket left/right
434F620 6 mm square socket, push-through 14 mm internal groove left/right
434F606 6 mm hexagon socket, push-through 12 mm square socket left/right
434F608 6 mm hexagon socket, push-through 7 mm square socket left/right
434F607 6 mm hexagon socket, push-through 14 mm internal groove left/right
434F604 8 mm square socket, push-through 14 mm internal groove left/right
]]> 434F3__ https://geiger.de/en/product/434f3__/ Mon, 27 Apr 2026 05:57:54 +0000 https://geiger.de/produkt/434f3__/

434F3__

Bevel gearbox

Output torque

max. 3.0 Nm

Gear reduction

2:1

Efficiency

0,57

The gearbox is suitable for these applications

Blinds Venetian blinds

Features

  • For 50 mm top box

  • Housing made of high-strength plastic

  • Continuous inner profile on the output drive, therefore center installation also possible

  • Left and right gearbox version, for the same direction of rotation with left or right installation

  • Without end stop (AB)

  • See 432F… for matching gearbox brackets for various upper body dimensions. Gearbox holder

Technical data

Variants

Item no. Drive Output drive Installation side
434F314 6 mm, tang ∅ 11.9 mm 14 mm internal groove left
434F315 6 mm, tang ∅ 11.9 mm 14 mm internal groove right
434F360 6 mm, tang ∅ 11.9 mm 12 mm square socket right
434F361 6 mm, tang ∅ 11.9 mm 12 mm square socket left
434F364 6 mm, tang ∅ 11.9 mm 7 mm hexagon socket right
434F366 6 mm, tang ∅ 11.9 mm 7 mm hexagon socket left
434F369 6 mm, tang ∅ 11.9 mm 7 mm square socket left
434F370 6 mm, tang ∅ 11.9 mm 7 mm square socket right
]]> 433F0__ https://geiger.de/en/product/433f0__/ Fri, 24 Apr 2026 10:33:35 +0000 https://geiger.de/produkt/433f0__/

433F0__

Bevel gearbox

Output torque

max. 9.0 Nm

Gear reduction

3:1

Efficiency

0,76

The gearbox is suitable for these applications

Blinds Venetian blinds

Features

  • For 40 mm top box

  • Our most powerful gearbox in the Venetian blind sector

  • Zinc die-cast housing

  • Continuous inner profile on the output drive, therefore center installation also possible

  • Left and right gearbox version, for the same direction of rotation with left or right installation

  • See 432F… for matching gearbox brackets for various upper body dimensions. Gearbox holder

  • Without end stop (AB)

Technical data

Variants

Item no. Drive Output drive Installation side
433F001 6 mm, tang ∅ 11.9 mm 7 mm hexagon socket right
433F002 6 mm, tang ∅ 11.9 mm 7 mm hexagon socket left
433F003 6 mm, tang ∅ 11.9 mm 14 mm internal groove right
433F004 6 mm, tang ∅ 11.9 mm 14 mm internal groove right
433F011 6 mm, tang ∅ 11.9 mm 6 mm hexagon socket right
433F012 6 mm, tang ∅ 11.9 mm 6 mm hexagon socket left
433F025 6 mm, tang ∅ 11.9 mm 12 mm square socket right
433F026 6 mm, tang ∅ 11.9 mm 12 mm square socket left
]]> Rescue-J https://geiger.de/en/product/rescue-j/ Tue, 14 Apr 2026 12:19:12 +0000 https://geiger.de/produkt/rescue-j/

Rescue-J

Solution for external venetian blinds in the 2nd escape route

Downloads

The motor is suitable for these applications

Venetian blinds

Sun protection in the escape route:

The requirement in accordance with Section 33 of the Model Building Regulation (MBO) demands at least two independent escape routes per floor, at least one of which must comply with the regulations of the first escape route.

The first escape route is a traffic route that enables people to leave a hazardous area quickly. It leads either out of a building into the open or into a secured area. Examples include corridors, stairs and exits, which people use to escape to safety in the event of a fire.

In contrast to the first escape route, which is strictly regulated and clearly defined, there are countless possible solutions when designing the second escape route. Whether you consult the MBO or other state building regulations, you will not yet find uniform regulations nationwide.

For sun shading manufacturers, architects and planners, this represents a massive challenge in terms of design and implementation. This in turn can lead to conflicts. Especially if the fire protection requirements for sun shading in the second escape route are not taken into account. Furthermore, aesthetic aspects, monument protection regulations, structural framework conditions and, last but not least, costs must be reconciled.

Modular design – motor and gearbox with system!

The ingenious design of the RESCUE-J can be easily integrated into all standard top rails.
All components are dimensionally designed so that only the crank handle needs to be installed inside the building.

  • Space-saving: thanks to its modular design, the system can be integrated into all top tracks.
  • Flexible: RESCUE-J is available for external venetian blinds with 14 mm grooved tube or 12 mm square tube turning bars.
  • Maintenance-free: The motor, freewheel and gearbox require no maintenance. However, we recommend an annual inspection of the mechanical components by means of a test run.
  • Customer-oriented: In an emergency, the external venetian blind can be opened quickly and easily. The gear reduction of 2:1 makes operation child’s play.
RESCUE-J_v003_withLightBackground
  1. Venetian blind motor GJ5606 (6 Nm) The basis is our tried and tested mechanical Venetian blind motor. Optimum and fast setting of the end positions with just two buttons.
  2. Freewheel: Solid freewheel made of extremely stable and durable plastic. The freewheel is designed for 50 emergency operations and guarantees reliable use over the entire service life of the external venetian blind system.
  3. Bevel gearbox for emergency operation: Proven components and assemblies ensure smooth operation.
  4. Airtight hinge bearing: Prevents cold bridges and protects against draughts and condensation.
  5. Crank holder with safety seal
  6. AvantGarde crank handle: Elegant crank handle with concealed mechanism can be discreetly integrated into the room.

Installation

Slide the motor with freewheel, dampers and the mounted coupling pieces into the top rail. Secure the motor with the clamping bracket/clamping bridge and lock it with the locking lever. Insert the turning rods into the coupling pieces. Insert the gearbox holder on the side and secure with a screw if necessary. Insert the gearbox into the holder, paying attention to the alignment of the drive bushing. Suitable fastening of the spherical plain bearing plate must be checked and guaranteed by the customer! If a specific direction of crank rotation is required, the gearbox can be rotated by 180° axially.

NOTE: Crank operation is only possible in the upright position and is only intended for emergency operation.

Operation in case of fire

If the external venetian blind cannot be raised electrically in the event of a fire, RESCUE-J is used. Simply pull the linkage out of the bracket, push the sleeve of the AvantGarde crank upwards, bend the crank and turn it. The safety seal serves as a visual indicator that the crank should only be operated in an emergency.

The freewheel is triggered by forcefully operating the emergency hand crank, whereby a regular clicking sound can be heard.

Recommissioning

If the upper position was set by the limit stop switch, no action is required when restarting the GJ5606 motor. If the upper end position was set to position and the blind was manually cranked over this position, the upper end position must be reset. If the blind was opened using the crank handle, the crank handle should be turned a quarter turn in the opposite direction before commissioning in order to relieve the gearbox and prevent the crank handle from turning during motorized operation.

RESCUE-J Kits - Set contents

Components

Kit 1

for 14 mm grooved pipe

Kit 2

for 12 mm square pipe

Item no.M56F7000M56F7001
Venetian blind motor GJ5606 with freewheel and mounted coupling pieces for 14 mm slotted tubeX–
Venetian blind motor GJ5606 with freewheel and fitted couplings for 12 mm square tube–X
Connection cable, length = 0.5 m with STAS3XX
Extension for overrun limit switchXX
Bevel gearbox 2:1, output 14 mm slotted tubeX–
Bevel gearbox 2:1, output 12 mm square tube–X
Airtight spherical plain bearing, 90°, plate 22×85 mmXX
Aluminum frame AvantGarde, length = 1,200 mmXX
Plastic crank holder, RAL 9016XX
Security sealXX

Note: Please note that the gear holder and the fastening set (damper and clamping bridge/clamping bracket) must be ordered separately based on the dimensions of the top track and axle height.

Technical data
GJ5606kj with mechanical limit switch
Voltage 230 V~/50 Hz
Current 0,4 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W
Torque 6 Nm
Speed 26 rpm
Final cut-off range 80 revolutions
Protection class IP54
Overall length (w. cpl.) 390 mm
Operating mode S2 4 min.
Diameter 55 mm
weight approx. 1.60 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.

Curtain specifications

Curtain dimensions
Max. hanging area 5,5 m²
Max. Height 3,0 m
Max. Width 3,0 m

Maintenance and instructions

The system is maintenance-free. However, an annual test run is recommended to check the system. The occupants or employees in the premises secured by RESCUE-J should be instructed in its use.

]]> GJ56__ E17 SMI https://geiger.de/en/product/gj56__-e17-smi/ Mon, 30 Mar 2026 13:51:25 +0000 https://geiger.de/produkt/gj56__-e17-smi/

GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Perfection https://geiger.de/en/product/gj56__-e14-perfection/ Mon, 30 Mar 2026 13:30:35 +0000 https://geiger.de/produkt/gj56__-e14-perfection/

GJ56__ E14 Perfection

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
 
GJ56__ E14 Perfection with electronic limit switch GJ5603k GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Electricity 0,40 A 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 90 W 93 W 90 W 135 W 190 W
Torque 3 Nm 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Total length I (m. cpl.) 319.5 mm 319.5 mm 324.5 mm 329.5 mm 356.7 mm
Diameter 55 mm
Weight approx. 1.50 kg approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Performance https://geiger.de/en/product/gj56__-e14-performance/ Mon, 30 Mar 2026 12:48:26 +0000 https://geiger.de/produkt/gj56__-e14-performance/

GJ56__ E14 Performance

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

>
GJ56__ E14 Performance with elect. Limit switchGJ5603kGJ5606kGJ5606¹FJ5610GJ5620
Voltage230 V AC / 50 Hz
Electricity0,40 A0,40 A0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance90 W93 W90 W135 W190 W
Torque3 Nm6 Nm6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Operating modeS2 4 min.S2 4 min.S2 6 min.S2 4 min.S2 4 min.
Total length I (m. cpl.)319.5 mm319.5 mm324.5 mm329.5 mm356.7 mm
Diameter55 mm
Weightapprox. 1.50 kgapprox. 1.50 kgapprox. 1.60 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ5610v1 https://geiger.de/en/product/gj5610v1/ Mon, 30 Mar 2026 12:05:01 +0000 https://geiger.de/produkt/gj5610v1/

GJ5610v1

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

100 V

Suitable for a voltage of 100 V. Specifically designed for markets with a 100 V, 50/60 Hz power supply.

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Also available with optimized running time on request
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ5610v1
Voltage 100 V~ / 50/60 Hz
Current 1 A (50Hz)
Cos Phi >0,95
Inrush current (factor) x 1,2
Power output 99 W (50 Hz) / 118 W (60 Hz)
Torque 10 Nm
RPM 26 rpm (50 Hz) / 32 rpm (60 Hz)
Final cut-off range 80 revolutions
Protection class IP 54
Operating mode S2 4 min.
Overall length I (w. cpl.) 309 mm
Diameter 55 mm
weight approx. 1.70 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.
]]> GJ56__ T90 https://geiger.de/en/product/gj56__-t90/ Mon, 30 Mar 2026 10:54:26 +0000 https://geiger.de/produkt/gj56__-t90/

GJ56__ T90

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

HighTemperature

This blind operator is optimized for use in high-temperature environments. Thanks to the use of special materials and components, it is suitable for use in temperatures up to +90°C. It naturally meets the requirements specified in Cahier 3677 of the CSTB for Class B: 8,000 cycles at room temperature, 2,000 cycles at 75°C, and 500 […]

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

GJ56__ T90GJ5606 T90GJ5616 T90
Voltage230 V AC / 50 Hz
Current0,40 A0,70 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power output90 W150 W
Torque6 Nm2 x 8 Nm
Speed26 rpm
Final cut-off range80 revolutions
Protection classIP 54
Overall length I (w. cpl.)304 mm336 mm
Operating modeS2 6 min.
Sound pressure level34 db(a)40 db(a)
Diameter55 mm
weightapprox. 1.60 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]>