Cassette awnings – GEIGER Antriebstechnik https://geiger.de/en/ Mon, 25 May 2026 00:14:41 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Cassette awnings – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 SOL.TECline Qi Radio https://geiger.de/en/product/sol-tecline-qi-radio/ Tue, 14 Apr 2026 11:29:30 +0000 https://geiger.de/produkt/sol-tecline-qi-radio/

SOL.TECline Qi Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Technical data tubular motor SOL.TECline Qi Radio

SOL.TECline
>
SOL.TECline Qi Radio GB45F13-__/__GB45F13-10/15GB45F13-20/15GB45F13-30/15GB45F13-40/15GB45F13-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> SOL.TECline SoftPlus-Qi https://geiger.de/en/product/sol-tecline-softplus-qi/ Tue, 14 Apr 2026 11:12:38 +0000 https://geiger.de/produkt/sol-tecline-softplus-qi/

SOL.TECline SoftPlus-Qi

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOL.TECline
>
SOL.TECline SoftPlus-Qi GB45E09-__/__GB45E09-10/15GB45E09-20/15GB45E09-30/15GB45E09-40/15GB45E09-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.
]]> PRO.TECline SpindleRadio NHK https://geiger.de/en/product/pro-tecline-spindleradio-nhk/ Thu, 26 Mar 2026 12:08:47 +0000 https://geiger.de/produkt/pro-tecline-spindleradio-nhk/

PRO.TECline SpindleRadio NHK

Mechanical tubular motor Ø 45 mm with radio

Downloads

The motor is suitable for these applications

Roller shutters Screens Facade awnings Folding arm awnings Cassette awnings

The motor has these special features

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Quick adjustment of the end positions thanks to precise spindle cut-off using Allen screws

Limit switch adjustment

Upper end position

Auf Position

Lower end position

Auf Position

Technical data tubular motor PRO.TECline SpindleRadio NHK

PRO.TECline NHK
PRO.TECline SpindleRadio NHK GB45MR-__/__ GB45MR-10/15 GB45MR-20/15 GB45MR-30/15 GB45MR-40/15 GB45MR-50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final cut-off range 22 revolutions
Protection class IP44
Total length I 648 mm 668 mm 688 mm 708 mm 708 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A) 39 dB(A) 39 dB(A) 48 dB(A) 48 dB(A)
diameter 45 mm
Crank reduction ratio 26:1
Weight approx. 2.30 kg approx. 2.40 kg approx. 2.60 kg approx. 2.80 kg approx. 2.80 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes.
]]> PRO.TECline Spindle NHK https://geiger.de/en/product/pro-tecline-spindle-nhk/ Thu, 26 Mar 2026 10:56:42 +0000 https://geiger.de/produkt/pro-tecline-spindle-nhk/

PRO.TECline Spindle NHK

Mechanical tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Roller shutters Screens Facade awnings Folding arm awnings Cassette awnings

The motor has these special features

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Quick adjustment of the end positions thanks to precise spindle cut-off using Allen screws

Limit switch adjustment

Upper end position

Auf Position

Lower end position

Auf Position

Technical data tubular motor PRO.TECline Spindle NHK

PRO.TECline NHK
PRO.TECline Spindle NHK GB45M-__/__ GB45M-10/15 GB45M- 20/15 GB45M- 30/15 GB45M- 40/15 GB45M- 50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final cut-off range 22 revolutions
Protection class IP44
Total length I 528 mm 548 mm 568 mm 588 mm 588 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A) 39 dB(A) 39 dB(A) 48 dB(A) 48 dB(A)
diameter 45 mm
Crank reduction ratio 26:1
Weight approx. 2.20 kg approx. 2.30 kg approx. 2.50 kg approx. 2.70 kg approx. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes.
]]> PRO.TECline SpindleRadio https://geiger.de/en/product/pro-tecline-spindleradio/ Thu, 26 Mar 2026 09:03:53 +0000 https://geiger.de/produkt/pro-tecline-spindleradio/

PRO.TECline SpindleRadio

Mechanical tubular motor Ø 45 mm with radio

Downloads

The motor is suitable for these applications

Roller shutters Screens Facade awnings Folding arm awnings Cassette awnings

The motor has these special features

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Quick adjustment of the end positions thanks to precise spindle cut-off using Allen screws

Limit switch adjustment

Upper end position

Auf Position

Lower end position

Auf Position

Technical data tubular motor PRO.TECline SpindleRadio

PRO.TECline
PRO.TECline SpindleRadio GB45MR-__/__ GB45MR-10/15 GB45MR- 20/15 GB45MR- 30/15 GB45MR- 40/15 GB45MR- 50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final cut-off range 22 revolutions
Protection class IP44
Total length I 558 mm 578 mm 608 mm 638 mm 638 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 45 mm
Weight approx. 2.00 kg approx. 2.10 kg approx. 2.30 kg approx. 2.40 kg approx. 2.50 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes.
]]> SOLIDline Qi Radio https://geiger.de/en/product/solidline-qi-radio/ Tue, 24 Mar 2026 10:22:41 +0000 https://geiger.de/produkt/solidline-qi-radio/

SOLIDline Qi Radio

Electronic tubular motor Ø 45 mm with radio

Downloads

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Operation

The motor can be operated using a remote control or, alternatively, via a control switch (wired).

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available as a high-speed model upon request

Limit switch adjustment

Above

On stop

Below

Auf Position

Possible cylinder heads

SOC head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
GU45__-F13 GU4506-F13 GU4510-F13 GU4520-F13 GU4530-F13 GU4540-F13 GU4540-F13
Voltage 230 V~/50 Hz
Electricity 0,36 A 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 83 W 105 W 140 W 180 W 220 W 220 W
Torque 6 Nm 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 509.5 mm 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level² 39 dB(A) 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Radio frequency 433 MHz
Weight approx. 1.85 kg ca. 1,9 kg ca. 2,2 kg ca. 2,4 kg approx. 2.7 kg approx. 2.7 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOLIDline SoftPlus-Qi https://geiger.de/en/product/solidline-softplus-qi/ Tue, 24 Mar 2026 08:52:11 +0000 https://geiger.de/produkt/solidline-softplus-qi/

SOLIDline SoftPlus-Qi

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available as a high-speed model upon request

Limit switch adjustment

Above

On stop

Below

Auf Position

Possible cylinder heads

SOC head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
GU45__-E09 GU4506-E09 GU4510-E09 GU4520-E09 GU4530-E09 GU4540-E09 GU4540-E09
Voltage 230 V~/50 Hz
Electricity 0,36 A 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 83 W 105 W 140 W 180 W 220 W 220 W
Torque 06 Nm 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 509.5 mm 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level² 39 dB(A) 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Weight approx. 1.85 kg ca. 1,9 kg ca. 2,2 kg ca. 2,4 kg approx. 2.7 kg approx. 2.7 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOLIDline Sun AIR https://geiger.de/en/product/solidline-sun-air/ Wed, 18 Mar 2026 13:47:01 +0000 https://geiger.de/produkt/solidline-sun-air/

SOLIDline Sun AIR

AIR radio tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

On stop

Below

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
SOLIDline Sun AIR GU45__SOC-F04 GU4510SOC-F04 GU4520-F04 GU4530-F04 GU4540-F04 GU4550-F04
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length I ¹ 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level ² 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Weight approx. 1.90 kg approx. 2.20 kg approx. 2.40 kg approx. 2.70 kg approx. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> PRO.TECline Spindle https://geiger.de/en/product/pro-tecline-spindle/ Mon, 15 Sep 2025 00:21:22 +0000 https://geiger.de/produkt/pro-tecline-spindle/

PRO.TECline Spindle

Mechanical tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Roller shutters Screens Facade awnings Folding arm awnings Cassette awnings

The motor has these special features

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Quick adjustment of the end positions thanks to precise spindle cut-off using Allen screws

Limit switch adjustment

Upper end position

Auf Position

Lower end position

Auf Position

Technical data tubular motor PRO.TECline Spindle

PRO.TECline
PRO.TECline Spindle GB45S-__/__ GB45S-10/15 GB45S- 20/15 GB45S- 30/15 GB45S- 40/15 GB45S- 50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final cut-off range 22 revolutions
Protection class IP44
Total length I 438 mm 458 mm 488 mm 518 mm 518 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 45 mm
Weight approx. 1.90 kg approx. 2.00 kg approx. 2.20 kg approx. 2.40 kg approx. 2.40 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes.
]]>