SOLIDline Flex AIR motors for rolling shutters, screens and awnings

SOLIDline Flex AIR
SOLIDline Flex AIR

GEIGER tubular motor (ᴓ 45 mm) with AIR radio technology. Available from 10 to 50 Nm. Adaptor and driver for all current shafts. Plug-in connection cables.

GEIGER Soft functions

Plug & Play 

Only one operation to the upper and the lower end stop for the rolling shutters with stops and anti-lift device. Done! Plug & Play!

Soft motor intelligence

The SOLIDline AIR has a very sensitive intelligence which provides the typical GEIGER „soft shutdown“ in the end positions, in order to achieve optimal protection of the curtain.

Soft Position

Torque shutdowns stress the rolling shutter system more than position shutdowns. Therefore, the SOLIDline AIR uses torque shutdowns only when absolute necessary. Torque shutdowns in the upper end position are only made for the programming run and the reference runs after 50 cycles. After installation, there are no further torque shutdowns in the lower end position.

Application/Characteristics/Advantages

Application:

  • Rolling shutters (with or without stops/ anti-lift device)
  • Screens (ZIP screens/facade awnings etc.)
  • Open style folding arm awnings

Characteristics:

  • Setting of the end stops with any AIR transmitter
  • Intermediary position can be modified at any time
  • Flexible learning of the end stops (free positioning or torque shutoff)
  • Can operated in parallel
  • Plug-in connection cable in different lengths
  • Available with 10, 20, 30, 40 or 50 Nm

 Your advantage – 8-fold safety through:

  • Bidirectional radio system
  • Burglar resistant anti-lift device
  • Flexible in use (rolling shutters, screens, open style folding arm awnings)
  • Soft Position (for cloth protection)
  • Plug&Play (rolling shutters with stoppers and anti-lift device)
  • Obstacle detection in DOWN direction
  • Blocking detection in UP direction
  • Anti-freeze protection

Technical data tubular motor SOLIDline with KS motor head
GU4510 (10 Nm)
GU4520 (20 Nm)
GU4530 (30 Nm)
GU4540 (40 Nm)
GU4550 (50 Nm)
Voltage
230 V~/50 Hz
Power
0,47 A
0,63 A
0,80 A
1,00 A
1,00 A
Cos Phi
>0,95
Inrush current(Factor)
x 1,2
Power
105 W
140 W
180 W
220 W
220 W
Torque
10 Nm
20 Nm
30 Nm
40 Nm
50 Nm
Speed of rotation
16 1/min
16 1/min
16 1/min
16 1/min
12 1/min
Protection class
IP44
Total length 1)
516,5 mm
546,5 mm
566,5 mm
586,5 mm
586,5 mm
Operation type
S2 4 min.
S2 5 min.
S2 4 min.
S2 4 min.
S2 4 min.
Sound pressure level 2)
39 dB(A)
41 dB(A)
41 dB(A)
43 dB(A)
–
Diameter
45 mm
Weight
approx. 1,90 kg
approx. 2,20 kg
approx. 2,40 kg
approx. 2,70 kg
approx. 2,70 kg
Ambient
temperature/
Humidity
Operation: T = -10°C .. +60°C / H max. 90%
Storage: T = -15°C .. +70°C / dry and non-condensing place
1) SOLIDline COM: + 3,5 mm / SOLIDline SOC: + 3 mm / SOLIDline SIL: ± 0 mm (without bearing pin)
2) The average sound pressure level data are intended for guidance only.The values were determined by GEIGER at a distance of 1 m, with a hanging motor at idle speed and averaged over 10 seconds. There is no reference to any specific test standard.
3) GU4550 Available only with KS and SOC motor heads and only with CE test mark