Safety shutdown – GEIGER Antriebstechnik https://geiger.de/en/ Fri, 12 Jun 2026 09:48:43 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Safety shutdown – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 GJ56__ E17 SMI https://geiger.de/en/product/gj56__-e17-smi/ Mon, 30 Mar 2026 13:51:25 +0000 https://geiger.de/produkt/gj56__-e17-smi/

GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Perfection https://geiger.de/en/product/gj56__-e14-perfection/ Mon, 30 Mar 2026 13:30:35 +0000 https://geiger.de/produkt/gj56__-e14-perfection/

GJ56__ E14 Perfection

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
 
GJ56__ E14 Perfection with electronic limit switch GJ5603k GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Electricity 0,40 A 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 90 W 93 W 90 W 135 W 190 W
Torque 3 Nm 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Total length I (m. cpl.) 319.5 mm 319.5 mm 324.5 mm 329.5 mm 356.7 mm
Diameter 55 mm
Weight approx. 1.50 kg approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Performance https://geiger.de/en/product/gj56__-e14-performance/ Mon, 30 Mar 2026 12:48:26 +0000 https://geiger.de/produkt/gj56__-e14-performance/

GJ56__ E14 Performance

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

>
GJ56__ E14 Performance with elect. Limit switchGJ5603kGJ5606kGJ5606¹FJ5610GJ5620
Voltage230 V AC / 50 Hz
Electricity0,40 A0,40 A0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance90 W93 W90 W135 W190 W
Torque3 Nm6 Nm6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Operating modeS2 4 min.S2 4 min.S2 6 min.S2 4 min.S2 4 min.
Total length I (m. cpl.)319.5 mm319.5 mm324.5 mm329.5 mm356.7 mm
Diameter55 mm
Weightapprox. 1.50 kgapprox. 1.50 kgapprox. 1.60 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ5610v1 https://geiger.de/en/product/gj5610v1/ Mon, 30 Mar 2026 12:05:01 +0000 https://geiger.de/produkt/gj5610v1/

GJ5610v1

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

100 V

Suitable for a voltage of 100 V. Specifically designed for markets with a 100 V, 50/60 Hz power supply.

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Also available with optimized running time on request
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ5610v1
Voltage 100 V~ / 50/60 Hz
Current 1 A (50Hz)
Cos Phi >0,95
Inrush current (factor) x 1,2
Power output 99 W (50 Hz) / 118 W (60 Hz)
Torque 10 Nm
RPM 26 rpm (50 Hz) / 32 rpm (60 Hz)
Final cut-off range 80 revolutions
Protection class IP 54
Operating mode S2 4 min.
Overall length I (w. cpl.) 309 mm
Diameter 55 mm
weight approx. 1.70 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.
]]> GJ56__ T90 https://geiger.de/en/product/gj56__-t90/ Mon, 30 Mar 2026 10:54:26 +0000 https://geiger.de/produkt/gj56__-t90/

GJ56__ T90

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

HighTemperature

This blind operator is optimized for use in high-temperature environments. Thanks to the use of special materials and components, it is suitable for use in temperatures up to +90°C. It naturally meets the requirements specified in Cahier 3677 of the CSTB for Class B: 8,000 cycles at room temperature, 2,000 cycles at 75°C, and 500 […]

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

GJ56__ T90GJ5606 T90GJ5616 T90
Voltage230 V AC / 50 Hz
Current0,40 A0,70 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power output90 W150 W
Torque6 Nm2 x 8 Nm
Speed26 rpm
Final cut-off range80 revolutions
Protection classIP 54
Overall length I (w. cpl.)304 mm336 mm
Operating modeS2 6 min.
Sound pressure level34 db(a)40 db(a)
Diameter55 mm
weightapprox. 1.60 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> GJ5606 DuoDrive https://geiger.de/en/product/gj5606-duodrive/ Fri, 27 Mar 2026 09:43:30 +0000 https://geiger.de/produkt/gj5606-duodrive/

GJ5606 DuoDrive

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

DuoDrive

DuoDrive

Two seemingly conflicting requirements in a drive system: fast driving and slow turning. This allows for precise adjustment of the slat angle and quick opening and closing of the blind.

Advantages of the fast travel movement

  • Quick curtain protection in the event of a wind alarm
  • Greater convenience thanks to shorter travel times
  • More driving cycles until the thermal protection responds
  • Time saving during factory commissioning of the external venetian blind

Advantages of the slow slat turn

  • 3 times better resolution for slat positioning
  • Ideal for automated daylight control
  • Ideal for sensitive manual slat adjustment

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ5606 DuoDrive
Voltage 230 V~/50 Hz
Current 0,60 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 145 W
Torque 6 Nm
Speed 9/39 rpm
Final cut-off range 80 revolutions
Protection class IP 54
Overall length I (w. cpl.) 336 mm
Operating mode S2 4 min.
Diameter 55 mm
weight approx. 2.05 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.
]]> GJ56__ ME https://geiger.de/en/product/gj56__-me/ Thu, 26 Mar 2026 15:11:40 +0000 https://geiger.de/produkt/gj56__-me/

GJ56__ ME

Mechanical blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

2 button technology

Secure setting of the end positions using self-locking push buttons. Easy programming of the end positions in either direction of rotation.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • No adjustment cable required to set the end positions
  • Tool-free and secure installation in all standard head rails
  • Proven motor and brake concept

Options

  • Available as silent drive up to 10 Nm
  • Also available with optimized running time on request
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ME (standard mechanical) GJ5603k³ GJ5606k GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power output 90 W 93 W 135 W 190 W
Torque 3 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final cut-off range 80 revolutions
Protection class IP 54
Overall length I (w. cpl.) 299 mm 299 mm 309 mm 336 mm
Operating mode S2 4 min.
Sound pressure level 34 db(a) 34 db(a) 35 db(a) 40 db(a)
Diameter 55 mm
weight approx. 1.50 kg approx. 1.50 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.
GJ56__ME (runtime-optimized version)GJ5606GJ5616²³
Voltage230 V AC / 50 Hz
Current0,40 A0,70 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power output90 W150 W
Torque6 Nm2 x 8 Nm
Speed26 rpm
Final cut-off range80 revolutions
Protection classIP 54
Overall length I (w. cpl.)304 mm336 mm
Operating mode S2, 4 min.
Sound pressure level¹34 db(a)40 db(a)
Diameter55 mm
weightapprox. 1.60 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.

¹ The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to a specific test stand.

² Without VDE and EMC test mark.

³ Without CCC mark of conformity.

]]> GJ56__ AIR https://geiger.de/en/product/gj56__-air/ Wed, 18 Mar 2026 15:15:11 +0000 https://geiger.de/produkt/gj56__-air/

GJ56__ AIR

AIR radio shutter motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Adjustable blade angle

The adjustable basic angle of the vanes is important for ensuring consistent engagement of the intermediate position at the set vane angle. When the blind is opened and closed, the slats are at different angles. To compensate for this behavior at an intermediate position, the drive must know by how many degrees it needs to […]

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available as silent drive up to 10 Nm, for indoor use only
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data tubular motor SOLIDline with SOC head

GJ56__F03
>
GJ56__F03GJ5606kF03GJ5610F03GJ5620F03
Voltage230 V AC / 50 Hz
Current0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power93 W135 W190 W
Torque6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Overall length I (w. cpl.) 319.5 mm329.5 mm356.7 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.
Diameter55 mm
weightapprox. 1.50 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.
]]>