Obstacle detection in the UP direction – GEIGER Antriebstechnik https://geiger.de/en/ Fri, 12 Jun 2026 09:48:43 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Obstacle detection in the UP direction – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 SOL.TECline ZIP Radio https://geiger.de/en/product/sol-tecline-zip-radio/ Tue, 14 Apr 2026 12:09:10 +0000 https://geiger.de/produkt/sol-tecline-zip-radio/

SOL.TECline ZIP Radio

Electronic tubular motor, Ø  45  mm, with radio control

The motor is suitable for these applications

ZIP Screens

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

DualStop-Control

If the system detects an obstacle, the motor moves the blind a set distance in the opposite direction. After two more unsuccessful attempts, the system moves to its safety position (upper limit position). This applies in both the AUF and AB directions.

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Pinch protection

This feature prevents fingers or other objects from getting pinched or damaged.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Slow motion detection

The motor detects the system’s status and can identify changes in winding behavior. If the blind moves too slowly in the down direction and the bottom rail is in danger of jamming, the motor stops automatically to protect the system and the blind.

Soft position

The blind stops before reaching the top position to protect the materials.

Wind resilience

The obstacle detection system can distinguish between an obstacle and a gust of wind. If a gust of wind blows in the UP direction, the blind moves safely to its upper end position, protecting the system and preventing damage to the blind.

Product advantage

  • Electronic limit switch
  • Easy setup: Plug & Play
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC, ROC, or COM heads
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Possible cylinder heads

SOC head
COM head
ROC head

Technical Specifications

SOL.TECline SOC head
SOL.TECline ROC head
SOL.TECline COM head
>
SOL.TECline ZIP Radio GB45F14-__/__GB45F14-10/15GB45F14-20/15GB45F14-30/15GB45F14-40/15GB45F14-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ SOL.TECline-ROC: +5,9 mm / SOL.TECline-COM: +4,2 mm
² The average sound pressure level values are provided for reference only. The values were measured at GEIGER during idle operation with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOL.TECline ZIP-Perfection https://geiger.de/en/product/sol-tecline-zip-perfection/ Tue, 14 Apr 2026 11:40:32 +0000 https://geiger.de/produkt/sol-tecline-zip-perfection/

SOL.TECline ZIP-Perfection

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

ZIP Screens

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

DualStop-Control

If the system detects an obstacle, the motor moves the blind a set distance in the opposite direction. After two more unsuccessful attempts, the system moves to its safety position (upper limit position). This applies in both the AUF and AB directions.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Pinch protection

This feature prevents fingers or other objects from getting pinched or damaged.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Slow motion detection

The motor detects the system’s status and can identify changes in winding behavior. If the blind moves too slowly in the down direction and the bottom rail is in danger of jamming, the motor stops automatically to protect the system and the blind.

Soft position

The blind stops before reaching the top position to protect the materials.

Wind resilience

The obstacle detection system can distinguish between an obstacle and a gust of wind. If a gust of wind blows in the UP direction, the blind moves safely to its upper end position, protecting the system and preventing damage to the blind.

Product advantage

  • Electronic limit switch
  • Easy setup: Plug & Play
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC, ROC, or COM heads
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Possible cylinder heads

SOC head
COM head
ROC head

Technical Specifications

SOL.TECline SOC head
SOL.TECline ROC head
SOL.TECline COM head
>
SOL.TECline ZIP-Perfection GB45E11-__/__GB45E11-10/15GB45E11-20/15GB45E11-30/15GB45E11-40/15GB45E11-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
SOL.TECline-ROC: +5.9 mm / SOL.TECline-COM: +4.2 mm
²The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOL.TECline Qi Radio https://geiger.de/en/product/sol-tecline-qi-radio/ Tue, 14 Apr 2026 11:29:30 +0000 https://geiger.de/produkt/sol-tecline-qi-radio/

SOL.TECline Qi Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Technical data tubular motor SOL.TECline Qi Radio

SOL.TECline
>
SOL.TECline Qi Radio GB45F13-__/__GB45F13-10/15GB45F13-20/15GB45F13-30/15GB45F13-40/15GB45F13-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> SOL.TECline SoftPlus-Qi https://geiger.de/en/product/sol-tecline-softplus-qi/ Tue, 14 Apr 2026 11:12:38 +0000 https://geiger.de/produkt/sol-tecline-softplus-qi/

SOL.TECline SoftPlus-Qi

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOL.TECline
>
SOL.TECline SoftPlus-Qi GB45E09-__/__GB45E09-10/15GB45E09-20/15GB45E09-30/15GB45E09-40/15GB45E09-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.
]]> SOL.TECline X01 Radio https://geiger.de/en/product/sol-tecline-x01-radio/ Tue, 14 Apr 2026 10:56:00 +0000 https://geiger.de/produkt/sol-tecline-x01-radio/

SOL.TECline X01 Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Roller shutters

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.
  • Rigid shaft connectors and stoppers are absolutely essential

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Technical data tubular motor SOL.TECline X01 Radio

SOL.TECline
>
SOL.TECline X01 Radio GB45F12-__/__GB45F12-10/15GB45F12-20/15GB45F12-30/15GB45F12-40/15GB45F12-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> GJ56__ E17 SMI https://geiger.de/en/product/gj56__-e17-smi/ Mon, 30 Mar 2026 13:51:25 +0000 https://geiger.de/produkt/gj56__-e17-smi/

GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Perfection https://geiger.de/en/product/gj56__-e14-perfection/ Mon, 30 Mar 2026 13:30:35 +0000 https://geiger.de/produkt/gj56__-e14-perfection/

GJ56__ E14 Perfection

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
 
GJ56__ E14 Perfection with electronic limit switch GJ5603k GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Electricity 0,40 A 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 90 W 93 W 90 W 135 W 190 W
Torque 3 Nm 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Total length I (m. cpl.) 319.5 mm 319.5 mm 324.5 mm 329.5 mm 356.7 mm
Diameter 55 mm
Weight approx. 1.50 kg approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Performance https://geiger.de/en/product/gj56__-e14-performance/ Mon, 30 Mar 2026 12:48:26 +0000 https://geiger.de/produkt/gj56__-e14-performance/

GJ56__ E14 Performance

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data

>
GJ56__ E14 Performance with elect. Limit switchGJ5603kGJ5606kGJ5606¹FJ5610GJ5620
Voltage230 V AC / 50 Hz
Electricity0,40 A0,40 A0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance90 W93 W90 W135 W190 W
Torque3 Nm6 Nm6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Operating modeS2 4 min.S2 4 min.S2 6 min.S2 4 min.S2 4 min.
Total length I (m. cpl.)319.5 mm319.5 mm324.5 mm329.5 mm356.7 mm
Diameter55 mm
Weightapprox. 1.50 kgapprox. 1.50 kgapprox. 1.60 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> SOL.TECline SoftPerfection-X01 https://geiger.de/en/product/sol-tecline-softperfection-x01/ Thu, 26 Mar 2026 13:45:12 +0000 https://geiger.de/produkt/sol-tecline-softperfection-x01/

SOL.TECline SoftPerfection-X01

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

Roller shutters

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • Rigid shaft connectors and stoppers are absolutely essential
  • Adjustment of the end position possible via operating switch
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with stopper and anti-lift device and rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOL.TECline
SOL.TECline SoftPerfection-X01 GB45E03-__/__ GB4510E03-10/15 GB4520E03-20/15 GB4530E03-30/15 GB4540E03-40/15 GB4540E03-50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 438 mm 458 mm 488 mm 518 mm 518 mm
Operating mode S2 4 min.
Sound pressure level² 39 dB(A)
diameter 45 mm
Weight ca. 1,9 kg ca. 2,0 kg ca. 2,2 kg ca. 2,4 kg ca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.
]]> SOL.TECline Easy Radio https://geiger.de/en/product/sol-tecline-easy-radio/ Thu, 26 Mar 2026 13:29:51 +0000 https://geiger.de/produkt/sol-tecline-easy-radio/

SOL.TECline Easy Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Roller shutters Screens Folding arm awnings Facade awnings

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Technical data tubular motor SOL.TECline Easy Radio

SOL.TECline
SOL.TECline Easy Radio GB45F11-__/__ GB45F11-10/15 GB45F11-20/15 GB45F11-30/15 GB45F11-40/15 GB45F11-50/12
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length 438 mm 458 mm 488 mm 518 mm 518 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 45 mm
Radio frequency 433 MHz
Weight ca. 1,9 kg ca. 2,0 kg ca. 2,2 kg ca. 2,4 kg ca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes
]]>