Intermediate position – GEIGER Antriebstechnik https://geiger.de/en/ Mon, 25 May 2026 00:14:21 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Intermediate position – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 GJ56__ E17 SMI https://geiger.de/en/product/gj56__-e17-smi/ Mon, 30 Mar 2026 13:51:25 +0000 https://geiger.de/produkt/gj56__-e17-smi/

GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Perfection https://geiger.de/en/product/gj56__-e14-perfection/ Mon, 30 Mar 2026 13:30:35 +0000 https://geiger.de/produkt/gj56__-e14-perfection/

GJ56__ E14 Perfection

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
 
GJ56__ E14 Perfection with electronic limit switch GJ5603k GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Electricity 0,40 A 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 90 W 93 W 90 W 135 W 190 W
Torque 3 Nm 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Total length I (m. cpl.) 319.5 mm 319.5 mm 324.5 mm 329.5 mm 356.7 mm
Diameter 55 mm
Weight approx. 1.50 kg approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ AIR https://geiger.de/en/product/gj56__-air/ Wed, 18 Mar 2026 15:15:11 +0000 https://geiger.de/produkt/gj56__-air/

GJ56__ AIR

AIR radio shutter motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Adjustable blade angle

The adjustable basic angle of the vanes is important for ensuring consistent engagement of the intermediate position at the set vane angle. When the blind is opened and closed, the slats are at different angles. To compensate for this behavior at an intermediate position, the drive must know by how many degrees it needs to […]

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available as silent drive up to 10 Nm, for indoor use only
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data tubular motor SOLIDline with SOC head

GJ56__F03
>
GJ56__F03GJ5606kF03GJ5610F03GJ5620F03
Voltage230 V AC / 50 Hz
Current0,40 A0,60 A0,85 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power93 W135 W190 W
Torque6 Nm10 Nm2 x 10 Nm
Speed26 rpm
Limit switch range200 revolutions
Protection classIP 54
Overall length I (w. cpl.) 319.5 mm329.5 mm356.7 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.
Diameter55 mm
weightapprox. 1.50 kgapprox. 1.70 kgapprox. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.
]]> SOLIDline Zip Air https://geiger.de/en/product/solidline-zip-air/ Wed, 18 Mar 2026 14:42:20 +0000 https://geiger.de/produkt/solidline-zip-air/

SOLIDline Zip Air

AIR radio tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

ZIP Screens

The engine has the following features:

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

DualStop-Control

If the system detects an obstacle, the motor moves the blind a set distance in the opposite direction. After two more unsuccessful attempts, the system moves to its safety position (upper limit position). This applies in both the AUF and AB directions.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
>
SOLIDline Zip AIR GU45__-F04GU4510-F04GU4520-F04GU4530-F04GU4540-F04GU4550-F04
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length I ¹519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level ²39 dB(A)41 dB(A)41 dB(A)43 dB(A)–
Durchmesser45 mm
Weightapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOLIDline Sun AIR https://geiger.de/en/product/solidline-sun-air/ Wed, 18 Mar 2026 13:47:01 +0000 https://geiger.de/produkt/solidline-sun-air/

SOLIDline Sun AIR

AIR radio tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

On stop

Below

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
SOLIDline Sun AIR GU45__SOC-F04 GU4510SOC-F04 GU4520-F04 GU4530-F04 GU4540-F04 GU4550-F04
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length I ¹ 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level ² 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Weight approx. 1.90 kg approx. 2.20 kg approx. 2.40 kg approx. 2.70 kg approx. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]>