Insect protection – GEIGER Antriebstechnik https://geiger.de/en/ Mon, 25 May 2026 00:13:42 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Insect protection – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 SLIM.TECline Easy Radio https://geiger.de/en/product/slim-tecline-easy-radio/ Wed, 25 Mar 2026 07:45:43 +0000 https://geiger.de/produkt/slim-tecline-easy-radio/

SLIM.TECline Easy Radio

Electronic tubular motor Ø 35 mm with radio

Downloads

The motor is suitable for these applications

Roller shutters Screens ZIP Screens Insect protection

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Technical data tubular motor SLIM.TECline Easy Radio

SLIM.TECline Easy Radio GB35F11-__/__ GB35F11-06/26 GB35F11-10/17
Voltage 230 V~/50 Hz
Current 0,54 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 120 W
Torque 6 Nm 10 Nm
Speed 26 rpm 17 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Overall length 453 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 35 mm
Radio frequency 433 MHz
weight approx. 1.6 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes
]]> SLIM.TECline Easy https://geiger.de/en/product/slim-tecline-easy/ Wed, 25 Mar 2026 07:08:38 +0000 https://geiger.de/produkt/slim-tecline-easy/

SLIM.TECline Easy

Electronic tubular motor Ø 35 mm

Downloads

The motor is suitable for these applications

Roller shutters Screens ZIP Screens Insect protection

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Fast adjustment of end positions thanks to precise spindle cut-off

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Technical data tubular motor SLIM.TECline Easy

>
SLIM.TECline Easy GB35E01-__/__GB35E01-06/26GB35E01-10/17
Voltage230 V AC / 50 Hz
Current0,54 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power120 W
Torque6 Nm10 Nm
Speed26 rpm17 rpm
Limit switch range200 revolutions
Protection rating IP44
Overall length453 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
diameter35 mm
weightapprox. 1.6 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> SLIM.TECline SpindleRadio https://geiger.de/en/product/slim-tecline-spindleradio/ Wed, 25 Mar 2026 06:36:44 +0000 https://geiger.de/produkt/slim-tecline-spindleradio/

SLIM.TECline SpindleRadio

Mechanical tubular motor Ø 35 mm with radio control

Downloads

The motor is suitable for these applications

Roller shutters Screens ZIP Screens Insect protection

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Fast adjustment of end positions thanks to precise spindle cut-off

Notes

  • Operation via hand-held or wall-mounted transmitter

Limit switch adjustment

Above

Auf Position

Below

Auf Position

Technical data tubular motor SLIM.TECline Spindle

GB35R-__/__ GB35R-06/26 GB35R-10/17
Voltage 230 V~/50 Hz
Current 0,54 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 120 W
Torque 6 Nm 10 Nm
Speed 26 rpm 17 rpm
Final switch-off range 30 revolutions
Protection class IP44
Overall length 571 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 35 mm
weight approx. 1.90 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes
]]> SOLIDline Easy Radio https://geiger.de/en/product/solidline-easy-radio/ Thu, 19 Mar 2026 14:09:33 +0000 https://geiger.de/produkt/solidline-easy-radio/

SOLIDline Easy Radio

Electronic tubular motor, Ø  45  mm, with radio control

Downloads

The motor is suitable for these applications

Roller shutters Folding arm awnings Insect protection Screens

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Operation

The motor can be operated using a remote control or, alternatively, via a control switch (wired).

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Full stop*

Below

Auf Position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
>
GU45__F11GU4510F11GU4520F11GU4530F11GU4540F11GU4550F11
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level²39 dB(A)41 dB(A)41 dB(A)43 dB(A)–
Durchmesser45 mm
Radio frequency433 MHz
Weightapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOLIDline Touch https://geiger.de/en/product/solidline-touch/ Thu, 19 Mar 2026 13:30:48 +0000 https://geiger.de/produkt/solidline-touch/

SOLIDline Touch

Mechanical tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Roller shutters Folding arm awnings Screens

The engine has the following features:

1 button technology

Both end positions can be precisely adjusted using a single button on the motor head. No more complications when setting the end positions.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Plug-in connection cable available in various lengths
  • Quick adjustment of the end positions without adjustment cable

Notes

  • Do not use a switch with simultaneous UP/DOWN command
  • No parallel connection possible

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Below

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
GU45__MGU4506MGU4510MGU4520MGU4530MGU4540MGU4550M
Voltage230 V AC / 50 Hz
Electricity0,36 A0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance83 W105 W140 W180 W220 W220 W
Torque6 Nm10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm16 rpm12 rpm
Final cut-off range38 revolutions
Protection rating IP44
Total length¹509.5 mm519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level²39 dB(A)39 dB(A)41 dB(A)41 dB(A)43 dB(A)–
Durchmesser45 mm
Weightapprox. 1.85 kgapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOLIDline Flex AIR https://geiger.de/en/product/solidline-flex-air/ Wed, 18 Mar 2026 12:10:31 +0000 https://geiger.de/produkt/solidline-flex-air/

SOLIDline Flex AIR

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Roller shutters Folding arm awnings Screens

The engine has the following features:

AIR

With the AIR portfolio, we offer a bidirectional wireless solution that is already smart home ready. All AIR actuators can be easily and intelligently integrated into the building automation system of our exclusive development partner, Loxone.

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Intermediate position

An additional desired position can be taught in at any time.

MESH technology

All AIR drives feature MESH technology. As a result, each drive acts as an amplifier for the radio signal.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • Setting the end positions via hand-held or wall-mounted transmitter

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Full stop*

Below

Auf Position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
>
SOLIDline Flex AIR GU45__-F04GU4510-F04GU4520-F04GU4530-F04GU4540-F04GU4550-F04
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM16 rpm16 rpm16 rpm16 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length I ¹519.5 mm549.5 mm569.5 mm589.5 mm589.5 mm
Operating modeS2 4 min.S2 5 min.S2 4 min.S2 4 min.S2 4 min.
Sound pressure level ²39 dB(A)41 dB(A)41 dB(A)43 dB(A)–
Durchmesser45 mm
Weightapprox. 1.90 kgapprox. 2.20 kgapprox. 2.40 kgapprox. 2.70 kgapprox. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SLIM.TECline Spindle https://geiger.de/en/product/slim-tecline-spindle/ Mon, 15 Sep 2025 00:24:04 +0000 https://geiger.de/produkt/slim-tecline-spindle/

SLIM.TECline Spindle

Mechanical tubular motor Ø 35 mm

Downloads

The motor is suitable for these applications

Roller shutters Screens ZIP Screens Insect protection

The engine has the following features:

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Fast adjustment of end positions thanks to precise spindle cut-off

Limit switch adjustment

Above

Auf Position

Below

Auf Position

Technical data tubular motor SLIM.TECline Spindle

GB35S-__/__ GB35S-06/26 GB35S-10/17
Voltage 230 V~/50 Hz
Current 0,54 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 120 W
Torque 6 Nm 10 Nm
Speed 26 rpm 17 rpm
Final switch-off range 30 revolutions
Protection class IP44
Overall length 451 mm
Operating mode S2 4 min.
Sound pressure level 39 dB(A)
diameter 35 mm
weight approx. 1.90 kg
Ambient humidity dry, non-condensing
Storage temperature Storage: T = -15°C … +70°C
Subject to technical changes
]]> SOLIDline Easy https://geiger.de/en/product/solidline-easy/ Sat, 13 Sep 2025 20:53:21 +0000 https://geiger.de/produkt/solidline-easy/

SOLIDline Easy

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

Roller shutters Folding arm awnings Insect protection Screens

The engine has the following features:

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Soft position

The blind stops before reaching the top position to protect the materials.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Burglar-resistant

By maintaining a constant torque cutoff in the down direction, the roller shutter can effectively deter break-ins (this is only possible for roller shutters equipped with anti-lift devices).

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Above

Auf Position

Full stop*

Below

Auf Position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline COM head
GU45__-E01 GU4510-E01 GU4520-E01 GU4530-E01 GU4540-E01 GU4550-E01
Voltage 230 V~/50 Hz
Electricity 0,47 A 0,63 A 0,80 A 1,00 A 1,00 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 105 W 140 W 180 W 220 W 220 W
Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
RPM 16 rpm 16 rpm 16 rpm 16 rpm 12 rpm
Final switch-off range > 200 revolutions
Protection class IP44
Total length¹ 519.5 mm 549.5 mm 569.5 mm 589.5 mm 589.5 mm
Operating mode S2 4 min. S2 5 min. S2 4 min. S2 4 min. S2 4 min.
Sound pressure level² 39 dB(A) 41 dB(A) 41 dB(A) 43 dB(A) –
diameter 45 mm
Weight approx. 1.90 kg approx. 2.20 kg approx. 2.40 kg approx. 2.70 kg approx. 2.70 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ With COM head + 0.5 mm
² The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]>