Electronic motors – GEIGER Antriebstechnik https://geiger.de/en/ Tue, 16 Jun 2026 12:44:33 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://geiger.de/wp-content/uploads/2025/09/GEIGER_Favicon-100x100.png Electronic motors – GEIGER Antriebstechnik https://geiger.de/en/ 32 32 Rescue-J https://geiger.de/en/product/rescue-j/ Tue, 14 Apr 2026 12:19:12 +0000 https://geiger.de/produkt/rescue-j/

Rescue-J

Solution for external venetian blinds in the 2nd escape route

Downloads

The motor is suitable for these applications

Venetian blinds

Sun protection in the escape route:

The requirement in accordance with Section 33 of the Model Building Regulation (MBO) demands at least two independent escape routes per floor, at least one of which must comply with the regulations of the first escape route.

The first escape route is a traffic route that enables people to leave a hazardous area quickly. It leads either out of a building into the open or into a secured area. Examples include corridors, stairs and exits, which people use to escape to safety in the event of a fire.

In contrast to the first escape route, which is strictly regulated and clearly defined, there are countless possible solutions when designing the second escape route. Whether you consult the MBO or other state building regulations, you will not yet find uniform regulations nationwide.

For sun shading manufacturers, architects and planners, this represents a massive challenge in terms of design and implementation. This in turn can lead to conflicts. Especially if the fire protection requirements for sun shading in the second escape route are not taken into account. Furthermore, aesthetic aspects, monument protection regulations, structural framework conditions and, last but not least, costs must be reconciled.

Modular design – motor and gearbox with system!

The ingenious design of the RESCUE-J can be easily integrated into all standard top rails.
All components are dimensionally designed so that only the crank handle needs to be installed inside the building.

  • Space-saving: thanks to its modular design, the system can be integrated into all top tracks.
  • Flexible: RESCUE-J is available for external venetian blinds with 14 mm grooved tube or 12 mm square tube turning bars.
  • Maintenance-free: The motor, freewheel and gearbox require no maintenance. However, we recommend an annual inspection of the mechanical components by means of a test run.
  • Customer-oriented: In an emergency, the external venetian blind can be opened quickly and easily. The gear reduction of 2:1 makes operation child’s play.
RESCUE-J_v003_withLightBackground
  1. Venetian blind motor GJ5606 (6 Nm) The basis is our tried and tested mechanical Venetian blind motor. Optimum and fast setting of the end positions with just two buttons.
  2. Freewheel: Solid freewheel made of extremely stable and durable plastic. The freewheel is designed for 50 emergency operations and guarantees reliable use over the entire service life of the external venetian blind system.
  3. Bevel gearbox for emergency operation: Proven components and assemblies ensure smooth operation.
  4. Airtight hinge bearing: Prevents cold bridges and protects against draughts and condensation.
  5. Crank holder with safety seal
  6. AvantGarde crank handle: Elegant crank handle with concealed mechanism can be discreetly integrated into the room.

Installation

Slide the motor with freewheel, dampers and the mounted coupling pieces into the top rail. Secure the motor with the clamping bracket/clamping bridge and lock it with the locking lever. Insert the turning rods into the coupling pieces. Insert the gearbox holder on the side and secure with a screw if necessary. Insert the gearbox into the holder, paying attention to the alignment of the drive bushing. Suitable fastening of the spherical plain bearing plate must be checked and guaranteed by the customer! If a specific direction of crank rotation is required, the gearbox can be rotated by 180° axially.

NOTE: Crank operation is only possible in the upright position and is only intended for emergency operation.

Operation in case of fire

If the external venetian blind cannot be raised electrically in the event of a fire, RESCUE-J is used. Simply pull the linkage out of the bracket, push the sleeve of the AvantGarde crank upwards, bend the crank and turn it. The safety seal serves as a visual indicator that the crank should only be operated in an emergency.

The freewheel is triggered by forcefully operating the emergency hand crank, whereby a regular clicking sound can be heard.

Recommissioning

If the upper position was set by the limit stop switch, no action is required when restarting the GJ5606 motor. If the upper end position was set to position and the blind was manually cranked over this position, the upper end position must be reset. If the blind was opened using the crank handle, the crank handle should be turned a quarter turn in the opposite direction before commissioning in order to relieve the gearbox and prevent the crank handle from turning during motorized operation.

RESCUE-J Kits - Set contents

Components

Kit 1

for 14 mm grooved pipe

Kit 2

for 12 mm square pipe

Item no.M56F7000M56F7001
Venetian blind motor GJ5606 with freewheel and mounted coupling pieces for 14 mm slotted tubeX–
Venetian blind motor GJ5606 with freewheel and fitted couplings for 12 mm square tube–X
Connection cable, length = 0.5 m with STAS3XX
Extension for overrun limit switchXX
Bevel gearbox 2:1, output 14 mm slotted tubeX–
Bevel gearbox 2:1, output 12 mm square tube–X
Airtight spherical plain bearing, 90°, plate 22×85 mmXX
Aluminum frame AvantGarde, length = 1,200 mmXX
Plastic crank holder, RAL 9016XX
Security sealXX

Note: Please note that the gear holder and the fastening set (damper and clamping bridge/clamping bracket) must be ordered separately based on the dimensions of the top track and axle height.

Technical data
GJ5606kj with mechanical limit switch
Voltage 230 V~/50 Hz
Current 0,4 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W
Torque 6 Nm
Speed 26 rpm
Final cut-off range 80 revolutions
Protection class IP54
Overall length (w. cpl.) 390 mm
Operating mode S2 4 min.
Diameter 55 mm
weight approx. 1.60 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
Subject to technical changes.

Curtain specifications

Curtain dimensions
Max. hanging area 5,5 m²
Max. Height 3,0 m
Max. Width 3,0 m

Maintenance and instructions

The system is maintenance-free. However, an annual test run is recommended to check the system. The occupants or employees in the premises secured by RESCUE-J should be instructed in its use.

]]> SOL.TECline ZIP Radio https://geiger.de/en/product/sol-tecline-zip-radio/ Tue, 14 Apr 2026 12:09:10 +0000 https://geiger.de/produkt/sol-tecline-zip-radio/

SOL.TECline ZIP Radio

Electronic tubular motor, Ø  45  mm, with radio control

The motor is suitable for these applications

ZIP Screens

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

DualStop-Control

If the system detects an obstacle, the motor moves the blind a set distance in the opposite direction. After two more unsuccessful attempts, the system moves to its safety position (upper limit position). This applies in both the AUF and AB directions.

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Pinch protection

This feature prevents fingers or other objects from getting pinched or damaged.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Slow motion detection

The motor detects the system’s status and can identify changes in winding behavior. If the blind moves too slowly in the down direction and the bottom rail is in danger of jamming, the motor stops automatically to protect the system and the blind.

Soft position

The blind stops before reaching the top position to protect the materials.

Wind resilience

The obstacle detection system can distinguish between an obstacle and a gust of wind. If a gust of wind blows in the UP direction, the blind moves safely to its upper end position, protecting the system and preventing damage to the blind.

Product advantage

  • Electronic limit switch
  • Easy setup: Plug & Play
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC, ROC, or COM heads
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Possible cylinder heads

SOC head
COM head
ROC head

Technical Specifications

SOL.TECline SOC head
SOL.TECline ROC head
SOL.TECline COM head
>
SOL.TECline ZIP Radio GB45F14-__/__GB45F14-10/15GB45F14-20/15GB45F14-30/15GB45F14-40/15GB45F14-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ SOL.TECline-ROC: +5,9 mm / SOL.TECline-COM: +4,2 mm
² The average sound pressure level values are provided for reference only. The values were measured at GEIGER during idle operation with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOL.TECline ZIP-Perfection https://geiger.de/en/product/sol-tecline-zip-perfection/ Tue, 14 Apr 2026 11:40:32 +0000 https://geiger.de/produkt/sol-tecline-zip-perfection/

SOL.TECline ZIP-Perfection

Electronic tubular motor Ø 45 mm

Downloads

The motor is suitable for these applications

ZIP Screens

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Downward block detection

The built-in motor intelligence detects obstacles as the system extends, thereby protecting the equipment.

DualStop-Control

If the system detects an obstacle, the motor moves the blind a set distance in the opposite direction. After two more unsuccessful attempts, the system moves to its safety position (upper limit position). This applies in both the AUF and AB directions.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Pinch protection

This feature prevents fingers or other objects from getting pinched or damaged.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Slow motion detection

The motor detects the system’s status and can identify changes in winding behavior. If the blind moves too slowly in the down direction and the bottom rail is in danger of jamming, the motor stops automatically to protect the system and the blind.

Soft position

The blind stops before reaching the top position to protect the materials.

Wind resilience

The obstacle detection system can distinguish between an obstacle and a gust of wind. If a gust of wind blows in the UP direction, the blind moves safely to its upper end position, protecting the system and preventing damage to the blind.

Product advantage

  • Electronic limit switch
  • Easy setup: Plug & Play
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC, ROC, or COM heads
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

Full stop*

* For roller shutters with a stopper and anti-lift device or a rigid shaft connection

Possible cylinder heads

SOC head
COM head
ROC head

Technical Specifications

SOL.TECline SOC head
SOL.TECline ROC head
SOL.TECline COM head
>
SOL.TECline ZIP-Perfection GB45E11-__/__GB45E11-10/15GB45E11-20/15GB45E11-30/15GB45E11-40/15GB45E11-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
SOL.TECline-ROC: +5.9 mm / SOL.TECline-COM: +4.2 mm
²The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
]]> SOL.TECline Qi Radio https://geiger.de/en/product/sol-tecline-qi-radio/ Tue, 14 Apr 2026 11:29:30 +0000 https://geiger.de/produkt/sol-tecline-qi-radio/

SOL.TECline Qi Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Technical data tubular motor SOL.TECline Qi Radio

SOL.TECline
>
SOL.TECline Qi Radio GB45F13-__/__GB45F13-10/15GB45F13-20/15GB45F13-30/15GB45F13-40/15GB45F13-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> SOL.TECline SoftPlus-Qi https://geiger.de/en/product/sol-tecline-softplus-qi/ Tue, 14 Apr 2026 11:12:38 +0000 https://geiger.de/produkt/sol-tecline-softplus-qi/

SOL.TECline SoftPlus-Qi

Electronic tubular motor Ø 45 mm

The motor is suitable for these applications

Cassette awnings

The engine has the following features:

Lane detection

While in operation, the motor detects which operating range it is in. This allows it to apply exactly the amount of force required for that specific range. The SoftPlus-Qi is exceptionally powerful at the awning’s pivot point, yet operates with particular precision during the closing phase. This ensures a long service life for the system.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Auf Position

Possible cylinder heads

SOC head
COM head

Technical data tubular motor SOLIDline with SOC head

SOL.TECline
>
SOL.TECline SoftPlus-Qi GB45E09-__/__GB45E09-10/15GB45E09-20/15GB45E09-30/15GB45E09-40/15GB45E09-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length¹438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Schalldruckpegel²39 dB(A)
Durchmesser45 mm
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
Subject to technical changes.
]]> SOL.TECline X01 Radio https://geiger.de/en/product/sol-tecline-x01-radio/ Tue, 14 Apr 2026 10:56:00 +0000 https://geiger.de/produkt/sol-tecline-x01-radio/

SOL.TECline X01 Radio

Electronic tubular motor Ø 45 mm with radio

The motor is suitable for these applications

Roller shutters

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Delayed learning

The motor does not learn its actual end positions until the fifth driving cycle.

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Plug & Play

Automatic detection of end positions without time-consuming adjustment during installation. Completed in just one up and down cycle. Quick and precise adjustment of end positions.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Soft position

The blind stops before reaching the top position to protect the materials.

Synchronization position

Consistent stopping behavior is always guaranteed, even with roller shutters of varying widths or heights. No more roller shutters hanging at different heights in the fully raised position.

Product advantage

  • Electronic limit switch
  • Automatic detection left/right installation
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Already in learning mode on delivery

Notes

  • The limit positions can be programmed using any control cable. Any control cable that has a programming button or supports simultaneous UP/DOWN commands can be used.
  • Do not use a switch during operation that allows simultaneous UP/DOWN commands, to prevent the learning mode from being activated accidentally.
  • Rigid shaft connectors and stoppers are absolutely essential

Options

  • Available with SOC or COM head
  • Available as a high-speed model upon request

Limit switch adjustment

Upper end position

Full stop*

Lower end position

Full stop*

* For roller shutters with stopper and anti-lift device / rigid shaft connection

Technical data tubular motor SOL.TECline X01 Radio

SOL.TECline
>
SOL.TECline X01 Radio GB45F12-__/__GB45F12-10/15GB45F12-20/15GB45F12-30/15GB45F12-40/15GB45F12-50/12
Voltage230 V AC / 50 Hz
Electricity0,47 A0,63 A0,80 A1,00 A1,00 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Performance105 W140 W180 W220 W220 W
Torque10 Nm20 Nm30 Nm40 Nm50 Nm
RPM15 rpm15 rpm15 rpm15 rpm12 rpm
Limit switch range200 revolutions
Protection rating IP44
Total length438 mm458 mm488 mm518 mm518 mm
Operating mode S2, 4 min.
Sound pressure level39 dB(A)
Durchmesser45 mm
Radio frequency433 MHz
Weightca. 1,9 kgca. 2,0 kgca. 2,2 kgca. 2,4 kgca. 2,4 kg
Ambient humidity dry, non-condensing
Storage temperatureStorage: T = -15°C … +70°C
Subject to technical changes
]]> POWER.TECline SpindleRadio NHK https://geiger.de/en/product/power-tecline-spindleradio-nhk/ Fri, 10 Apr 2026 07:37:52 +0000 https://geiger.de/produkt/power-tecline-spindleradio-nhk/

POWER.TECline SpindleRadio NHK

Mechanical tubular motor Ø 59 mm

Downloads

The motor is suitable for these applications

Roller shutters Folding arm awnings Roller shutters

The engine has the following features:

GEIGER Radio 2.0

The unidirectional radio system offers a long range and enables secure communication with remote receivers.

Wind-resistant

The spindle does not have a jam detection feature. As a result, in the event of a wind alarm, the awning quickly moves to its protected upper end position despite strong gusts of wind. The system remains undamaged.

Product advantage

  • Mechanical limit switch
  • Fixed connection cable with open end
  • Quick adjustment of the end positions thanks to precise spindle cut-off using Allen screws

Limit switch adjustment

Upper end position

Auf Position

Lower end position

Auf Position

Technical data tubular motor POWER.TECline Spindle NHK

GB59MR-__/__GB59MR-80/12GB59MR-100/12GB59MR-120/09GB59MR-140/09
Voltage230 V AC / 50 Hz
Current1,20 A1,65 A 1,20 A1,65 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power270 W365 W270 W365 W
Torque80 Nm100 Nm120 Nm140 Nm
Speed12 rpm12 rpm9 rpm9 rpm
Final switch-off range24 revolutions
Protection rating IP44
Overall length 1)798 mm798 mm843 mm843 mm
Operating mode S2, 4 min.
Sound pressure level 2)48 dB(A)
diameter59 mm
weightapprox. 6.40 kg
Subject to technical changes.
]]> Rescue-R https://geiger.de/en/product/rescue-r/ Tue, 07 Apr 2026 10:32:16 +0000 https://geiger.de/produkt/rescue-r/

Rescue-R

Solution for roller shutters in the 2nd escape route

Downloads

The motor is suitable for these applications

Roller shutters

Sun protection in the escape route:

The requirement in accordance with Section 33 of the Model Building Regulation (MBO) demands at least two independent escape routes per floor, at least one of which must comply with the regulations of the first escape route.

The first escape route is a traffic route that enables people to leave a hazardous area quickly. It leads either out of a building into the open or into a secured area. Examples include corridors, stairs and exits, which people use to escape to safety in the event of a fire.

In contrast to the first escape route, which is strictly regulated and clearly defined, there are countless possible solutions when designing the second escape route. Whether you consult the MBO or other state building regulations, you will not yet find uniform regulations nationwide.

For sun shading manufacturers, architects and planners, this represents a massive challenge in terms of design and implementation. This in turn can lead to conflicts. Especially if the fire protection requirements for sun shading in the second escape route are not taken into account. Furthermore, aesthetic aspects, monument protection regulations, structural framework conditions and, last but not least, costs must be reconciled.

Modular design – motor and gearbox with system!

The ingenious design of the RESCUE-R can be easily integrated into all standard roller shutter boxes.
All components are dimensionally designed so that only the crank handle needs to be installed inside the building.

  • Space-saving: thanks to its modular design, the system can be integrated into all front and top boxes.
  • Flexible: RESCUE-R is available for roller shutters with 60 mm octagonal shaft and 50 mm octagonal shaft.
  • Maintenance-free: Motor, freewheel and gearbox require no maintenance.
  • Customer-oriented: In an emergency, the roller shutter can be opened quickly and easily. The gear reduction of 4:1 makes operation child’s play.
RESCUE-R_with_background
  1. Roll-off bearing (optional)
  2. SOLIDline motor
    Touch (10 Nm):     Optimum and fast adjustment of the end positions with just one button. No time-consuming turning of different adjustment screws.
    X01 RESCUE (10 Nm): Plug & Play motor with electronic limit switch and self-learning end positions (can be switched in parallel).
  3. Freewheel with tubular driver: Solid freewheel made of extremely stable and durable plastic.
  4. Bevel gearbox for emergency operation: Proven components and assemblies ensure smooth operation. A patent application has been filed for the gearbox.
  5. Airtight hinge bearing: Prevents cold bridges and protects against draughts and condensation.
  6. Crank holder with safety seal
  7. AvantGarde crank handle: Elegant crank handle with concealed mechanism can be discreetly integrated into the room.

Installation

The freewheel with shaft driver is fitted to the motor. The system is installed as usual, except that the gearbox is fitted instead of the counter bearing and the roller capsule. If a specific direction of crank rotation is required, the gearbox can be rotated by 180° axially. The shaft length/hanging width must not be less than 750 mm.

Operation in case of fire

If the roller shutter cannot be raised electrically in the event of a fire, RESCUE-R is used. Simply remove the linkage from the bracket and turn it. The safety seal serves as a visual indicator that the crank should only be operated in an emergency. Operating the emergency hand crank triggers the freewheel, whereby a regular clicking sound can be heard if necessary.

Recommissioning

No measures are necessary when recommissioning both SOLIDline motors. If the blind was opened with the crank handle, the crank handle should be turned a quarter turn in the opposite direction before commissioning to relieve the gearbox and prevent the crank handle from turning during motor operation.

RESCUE-R - choosing the right kit or module solution

Installation situation 1

Top box
Front box

Installation situation 2

Top box
Front box

RESCUE-R kit or modules - set contents

Components Kit Modules 1.x Modules 2.x Modules 3.x
SOLIDline SOC 10 Nm X X – –
Connection cable, length = 3m, with open cable ends X X – –
Tube adapter X X – X
Freewheel with tube driver X X – X
Bevel gearbox 4:1, drive 6mm square X – X X
Airtight spherical plain bearing, 90°, plate 22×85 mm X – X –
Aluminum frame AvantGarde, length = 1,200 mm X – X –
Plastic crank holder, RAL 9016 X – X –
Security seal X – X –

Order table

Installation situation 1Installation situation 2
60mm 8-kt. shaft50mm 8-kt. shaft60mm 8-kt. shaft50mm 8-kt. shaft
KitsSOLIDline Touch

Kit 1

M45F9000

Kit 3

M45F9002

Kit 2

M45F9001

Kit 4

M45F9003

SOLIDline X01 RESCUE

Kit 5

M45F9010

Kit 7

M45F9012

Kit 6

M45F9011

Kit 8

M45F9013

Modules 1.xSOLIDline Touch

Modules 1.1

M45F9050

Modules 1.3

M45F9052

Modules 1.2

M45F9051

Modules 1.4

M45F9053

SOLIDline X01 RESCUE

Modules 1.5

M45F9150

Modules 1.7

M45F9152

Modules 1.6

M45F9151

Modules 1.8

M45F9153

Modules 2.x

Modules 2.1

456F200

Modules 2.2

456F201

Modules 2.1

456F200

Modules 2.2

456F201

Modules 3.x

Modules 3.1

456F300

Modules 3.3

456F302

Modules 3.2

456F301

Modules 3.4

456F303

Technical data tubular motor SOLIDline with SOC head

SOLIDline SOC head
SOLIDline-SOC GU4510SOLIDline Touch / SoftPerfection-X01 RESCUE
Voltage230 V AC / 50 Hz
Current0,47 A
Cos Phi>0,95
Inrush current (factor) × 1.2
Power105 W
Torque10 Nm
Speed16 rpm
Final switch-off range38 revolutions (Touch) / > 200 revolutions (SoftPerfection-X01)
Protection rating IP44
Overall length519.5 mm
Operating mode S2, 4 min.
Sound pressure level¹39 dB(A)
Durchmesser45 mm
weightapprox. 1.90 kg
Ambient humidity dry, non-condensing
Storage temperatureT = -15°C .. +70°C
¹ The information on the average sound pressure level is for guidance only. The values were recorded at GEIGER at idle speed with the drive suspended freely at a distance of 1 m and averaged over 10 seconds. The measurement does not refer to any specific test standard.
Subject to technical changes.
Technical data bevel gearbox 456F150 / 456F151
max. Output torque12 Nm
Reduction ratio4:1
Efficiency0,85
Subject to technical changes.
]]> GJ56__ E17 SMI https://geiger.de/en/product/gj56__-e17-smi/ Mon, 30 Mar 2026 13:51:25 +0000 https://geiger.de/produkt/gj56__-e17-smi/

GJ56__ E17 SMI

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

SMI 3.0

The motor utilizes the third generation of the Standard Motor Interface protocol. This market-established protocol provides a uniform building automation interface for controlling sun protection systems. It enables motor feedback, allowing its status and current position to be queried.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
GJ56__ E17 SMI with electronic limit switch GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Power 93 W 90 W 135 W 190 W
Torque 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Overall length I (w. cpl.) 371 mm 376 mm 381 mm 408 mm
Diameter 55 mm
weight approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]> GJ56__ E14 Perfection https://geiger.de/en/product/gj56__-e14-perfection/ Mon, 30 Mar 2026 13:30:35 +0000 https://geiger.de/produkt/gj56__-e14-perfection/

GJ56__ E14 Perfection

Electronic blind motor

Downloads

The motor is suitable for these applications

Venetian blinds

The engine has the following features:

Anti-freeze protection

The motor detects that the blind is frozen to the windowsill and stops the rolling-up process.

Dynamische Drehmomentabschaltung

Dynamic torque cut-off

The self-learning torque cut-off detects changes in the load and adjusts accordingly to ensure consistent performance.

Intermediate position

An additional desired position can be taught in at any time.

Obstacle detection in the UP direction

The built-in motor intelligence detects obstacles during retraction, thereby protecting the system.

Referencing

Every 50 cycles, a reference run is performed to verify that the end positions are correct. To do this, the curtain is raised until the motor cuts out due to torque. The end positions are checked in this way and, if necessary, readjusted.

Safety shutdown

The motor is equipped with an overrun limit switch. This acts as an “emergency stop button” and protects the system from damage.

Product advantage

  • Electronic limit switch
  • Start-up time approx. 100 ms
  • Can be wired in parallel
  • Plug-in connection cable available in various lengths
  • Overrun limit switch for safety shutdown
  • Secure mounting in all standard head rails
  • Proven motor and brake concept

Notes

  • Setting the end positions using the setting switch, operating switch or the overrun limit switch

Options

  • Available as silent drive up to 10 Nm
  • Extendable overrun limit switch possible

Limit switch adjustment

Upper end position

Auf Position

Full stop*

Lower end position

Auf Position

* Drive onto the overrun limit switch

Technical data
 
GJ56__ E14 Perfection with electronic limit switch GJ5603k GJ5606k GJ5606¹ GJ5610 GJ5620
Voltage 230 V~/50 Hz
Electricity 0,40 A 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi >0,95
Inrush current (factor) x 1,2
Performance 90 W 93 W 90 W 135 W 190 W
Torque 3 Nm 6 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 rpm
Final switch-off range > 200 revolutions
Protection class IP 54
Operating mode S2 4 min. S2 4 min. S2 6 min. S2 4 min. S2 4 min.
Total length I (m. cpl.) 319.5 mm 319.5 mm 324.5 mm 329.5 mm 356.7 mm
Diameter 55 mm
Weight approx. 1.50 kg approx. 1.50 kg approx. 1.60 kg approx. 1.70 kg approx. 2.20 kg
Ambient humidity dry, non-condensing
Storage temperature T = -15°C … +70°C
¹ Runtime-optimized motor
Subject to technical changes.
]]>