Phone: +49 7142 938-0 | E-Mail: info@geiger.de
Phone: +49 7142 938-0 | E-Mail: info@geiger.de
GEIGER SOLIDline SoftPlus-Qi
So far, the setting of the end positions of an awning was a complicated process that presupposed technical knowledge and that often required a setting cable. But those times are now over: GEIGER presents the new Plug & Play motor for awnings SOLIDline SoftPlus-Qi.
In order to adjust the end stops, the SOLIDline SoftPlus Qi requires no special knowledge and no setting cable.
The motor is delivered in the learning mode. After installation, the awning must be run to the desired end position and then closed - done! The automatic programming automatically recognizes and stores the lower end position. The upper end position is set at each retraction via a sensitive torque shutoff. After adjusting, the motor automatically switches to normal operation.
The installation is very easy and fast, the customer can subsequently adjust the lower end position. Through the intelligent control system the motor can switch back very easily into the learning mode, so that the customer can modify himself the end position by simply extending and closing the awning.
Further advantages of the new Plug & Play awning motor are the obstacle detection in UP direction and the automatic hanging length adjustment. The SOLIDline SoftPlus-Qi is available with a torque from 10 to 50 Nm and a diameter of 45 mm. An adapter allows use with any type of tube.
Gerhard Geiger GmbH & Co. KG | Schleifmühle 6 | D-74321 Bietigheim-Bissingen | info@geiger.de
The name GEIGER Antriebstechnik is synonymous worldwide for drive solutions in the sun protection area.
Today we are with about 250 employees one of the leading manufacturers of mechanical and electrical drives for Venetian blinds, awnings and rolling shutters.
GEIGER is a well-known, mid-sized company which offers world-wide drive components for the sun protection systems.
Follow us:
